Microsoft 070-544 test insides dumps : TS: Ms Virtual Earth 6.0, Application Development

Free renewal for one year

To cater to the demands of the majority of population who likes to enjoy preferential when making a purchase for goods, our 070-544 exam guide materials offer free renewal of exam trainings in one year so that every customer who buys our 070-544 practice exam questions will have free access to the renewal to their hearts' content. Isn't it an impressive thing to deal with this kind of exam? What's more, our 070-544 actual exam materials provide our customers with many discounts, whether they are old customers or new. Compared with other exam trainings which are engaged in the question making, our 070-544 exam guide materials do outweigh all others concerning this aspect.

Fast learning of customers

You must have experienced the feelings of being envious to those seeming talents who can get the hang of the core of something in such a short moment that you even cannot image. Now, you don't need to suffer from this miserable situation because you can become such a person too once you have used our 070-544 practice exam questions. The reason why the customers can gain the ability to have a quick comprehension to what is printed or said is that our 070-544 actual exam materials are attached by clear interpretation for some extremely difficult questions. And as you know, difficult questions of 070-544 exam guide are always so complex because they are intertwined with all kinds of small questions, so much as to be a kaleidoscope. Therefore, after you have found out the main thread of the method for these difficult questions, all those small problems will be readily solved. Perhaps this is also the reason why our 070-544 practice exam questions have witnessed the ever-progressive development in the international arena.

Simulation for the software version

Since you are a clever person, you must be aware of the fact that simulation plays a very important part in the success of the test, Through simulating in the 070-544 actual exam materials, you can have a better understanding of the procedure of the test, and thus you will be unlikely to be at loss when you have suddenly encountered something totally out of your expectation in the Microsoft 070-544 real test. In addition, there will no possibility for you to be under great pressure to deal with the questions occurring in the test. Just as what has been universally acknowledged, it is the last straw that has cracked down the clever person. And I want to say pressure can definitely be referred to as the last straw. However, with the help of our 070-544 actual exam materials, you can protect yourself from being subjected to any terrible pressure. Fantastic! Isn't it?

Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

With the passage of time, more and more people have come to realize the importance of Microsoft 070-544 exam. Therefore, they put high premium on the exams, hoping to win great success in the future career by passing the targeted exams. However, it is not always a piece of cake for them without appropriate learning tools. But all of these can be possible with our 070-544 actual exam training files. The reasons are as follows.

Microsoft 070-544 Exam Syllabus Topics:

Microsoft TS: Ms Virtual Earth 6.0, Application Development Sample Questions:

1. You have the following information about a hurricane path:
Latitudes
Longitudes
Time
Description
A measure point of the above data every 10 minutes
You need to display the movement, time, and description of the hurricane path on a Virtual
Earth 6.0 map.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)

A) Store the hurricane path as a Live Maps collection.
B) Encode the measure points as pushpins by using the VEShape.SetPoints method.
C) Import a Live Maps collection to a new layer.
D) Encode the measure points as a GeoRSS feed.
E) Encode the hurricane path as a polyline by using the VEShape(VEShapeType, points) method.
F) Import a GeoRSS feed to a new layer.

2. You create a Microsoft MapPoint Web Service application that accepts routes from users.
You need to find points of interest that are within one mile of a route or within three miles of the endpoints of the route. What are two possible ways to achieve the goal? (Each correct answer presents a complete solution. Choose two.)

A) findNearRouteSpec.Distance = 1 findResults = findService.FindNearRoute ( findNearRouteSpec ) foundLocations.Add ( FindResults ) findNearbySpec.Distance = 3 For
Each findResult As FindResult In FindResults.Results findNearbySpec.LatLong = findResult.FoundLocation.LatLong FindResults = findService.FindNearby ( findNearbySpec
) foundLocations.Add ( FindResults ) Next
B) findNearRouteSpec.Distance = 1 Dim findResults As FindResults = _
findService.FindNearRoute ( findNearRouteSpec ) foundLocations.Add ( FindResults ) findNearbySpec.Distance = 3 findNearbySpec.LatLong = startLatLong FindResults = findService.FindNearby ( findNearbySpec ) foundLocations.Add ( FindResults ) findNearbySpec.LatLong = endLatLong FindResults = findService.FindNearby ( findNearbySpec ) foundLocations.Add ( FindResults )
C) findNearRouteSpec.Distance = 1 findResults = findService.FindNearRoute ( findNearRouteSpec ) foundLocations.Add ( findResults ) findNearbySpec.Distance = 3 For
Each segment As Segment In route.Itinerary.Segments findNearbySpec.LatLong = segment.Waypoint.Location.LatLong findResults = findService.FindNearby ( findNearbySpec ) foundLocations.Add ( findResults ) Next
D) findNearRouteSpec.Distance = 1 findResults = findService.FindNearRoute ( findNearRouteSpec ) foundLocations.Add ( findResults ) findNearbySpec.Distance = 3 For
Each segment As Segment In route.Itinerary.Segments For Each direction As Direction In segment.Directions findNearbySpec.LatLong = direction.LatLong findResults = findService.FindNearby ( findNearbySpec ) foundLocations.Add ( findResults ) Next Next

3. You are creating a Web application by using the Virtual Earth 6.0 map control in the
Microsoft Visual Studio environment. A Web page in the application is programmed by using the client-side JavaScript code. You insert break points at appropriate locations within the code. When you debug the application, you find that you are able to step into the server-side code. However, you are unable to step into the client-side JavaScript code.
You need to debug the client-side JavaScript code. What should you do?

A) In Microsoft Internet Explorer, select the Enable Display a notification about every script error option in the Internet Options dialog box.
B) In Visual Studio, select the Attach to Process option from the Debug menu. Then attach the debugger to the Microsoft Internet Explorer process.
C) In the client-side JavaScript code, insert the Debugger command before each break point.
D) In Microsoft Internet Explorer, clear the Disable Script Debugging (Internet Explorer) option in the Internet Options dialog box.

4. The locations of the vehicles of your company are available as coordinates. You need to display only the current location of a vehicle on a Virtual Earth 6.0 base map layer. What are two possible code segments you can use to achieve this goal? (Each correct answer presents a complete solution. Choose two.)

A) map = new VEMap('myMap'); map.LoadMap(); layer = new VEShapeLayer(); map.AddShapeLayer(layer); shape = new VEShape(VEShapeType.Pushpin, new
VELatLong(latitude, longitude)); layer.AddShape(shape);
B) map = new VEMap('myMap'); map.LoadMap(); map.AddPushpin(new
VELatLong(longitude, latitude));
C) map = new VEMap('myMap'); map.LoadMap(); layer = new VEShapeLayer(); map.AddShapeLayer(layer); shape = new VEShape(VEShapeType.Pushpin, new
VELatLong(longitude, latitude)); layer.AddShape(shape);
D) map = new VEMap('myMap'); map.LoadMap(); shape = new
VEShape(VEShapeType.Pushpin, new VELatLong(latitude, longitude));
map.AddShape(shape);
E) map = new VEMap('myMap'); map.LoadMap(); map.AddPushpin(new
VELatLong(latitude, longitude));

5. You are managing Microsoft MapPoint Web Service (MWS) data in an application by using the Customer Services site. The application uses the DS_ONE data source stored on the
Customer Services site. The application displays several records in the wrong locations on the map. You need to display these records correctly on the map. What should you do?

A) Download the data source. Remove the latitude and longitude data. Re-upload the corrected data to the Customer Services site.
B) View the data source geocoding results. Filter on match code. Manually edit all the resulting locations through the Customer Services site.
C) Download the data source. Update each bad geocode by using a Find or FindAddress call. Re-upload the corrected data to the Customer Services site.
D) Download the data source. Update all the locations by using a Find or FindAddress call.
Re-upload the corrected data to the Customer Services site.

Solutions: