Download Network Appliance NS0-176 Exam Dumps to Pass Exam Easily in 2023
Get 100% Real Free Cisco and NetApp FlexPod NS0-176 Sample Questions
NetApp NS0-176 Exam Certification Details:
| Exam Registration | PEARSON VUE |
| Exam Price | $150 USD |
| Sample Questions | NetApp NS0-176 Sample Questions |
| Duration | 60 minutes |
| Exam Code | NS0-176 FlexPod |
| Number of Questions | 60 |
| Exam Name | Cisco and NetApp FlexPod Implementation and Administration |
NEW QUESTION 26
You have a FlexPod solution with Cisco 6296UP Fabric Interconnects. You currently have a direct-attached AFF8040 system using FCoE for storage connectivity. You would like to reconfigure the FlexPod so that the storage is connected through the upstream switches.
Using UCS Manager, which two steps would you perform to accomplish this task? (Choose two.)
- A. Configure the FI ports with the Uplink role.
- B. Using the Configure Unified Ports wizard, change the port types to Ethernet.
- C. Configure the FI ports with the FCoE Uplink role.
- D. Using the Configure Unified Ports wizard, change the port types to FC.
Answer: A,D
NEW QUESTION 27
An administrator is trying to present an NFS datastore to an ESXi host.
Which two must be available before mounting? (Choose two.)
- A. export policy access
- B. host name case sensitivity
- C. datastore name case sensitivity
- D. junction path case sensitivity
Answer: A,B
NEW QUESTION 28
The storage administrator created an export policy for a volume on a NetApp cluster.
The export policy contains a single export rule with the parameters shown below.
- protocol nfs - rorule any
- clientmatch 10.1.16.0/255.255.255.0 - rwrule any
Two hosts attempt to access the volume using the NFS protocol shown below.
- HostA with IP address 10.1.17.37 sends an access request using the NFSv3 protocol
- HostB with IP address 10.1.16.24 sends an access request using the NFSv4 protocol
Which statement about this scenario is true?
- A. HostA's access to the volume will be blocked by the clientmatch parameter; HostB's access to the volume will be blocked by the protocol parameter.
- B. HostA's access to the volume will be blocked by the clientmatch parameter; HostB will be granted RO/RW access to the volume.
- C. HostA's access to the volume will be blocked by the protocol parameter; HostB will be granted RO/RW access to the volume.
- D. HostA will be granted RO/RW access to the volume; HostB's access to the volume will be blocked by the protocol parameter.
Answer: A
NEW QUESTION 29
When connecting the Nexus 1110-X to the Nexus switch, what Spanning Tree port type is used?
- A. Network
- B. Trunk
- C. Edge trunk
- D. Normal
- E. Edge
Answer: C
NEW QUESTION 30
Refer to the exhibit.
When configuring a Cisco UCS B-Series server to support boot from SAN in a FlexPod deployment, which statement is correct?
- A. This configuration will support boot from SAN
- B. Boot from SAN is not supported in a FlexPod environment
- C. This given configuration will not support a local ESXi installation
- D. This configuration will not support boot from SAN.
Answer: D
NEW QUESTION 31
You are installing a FlexPod Express solution with a NetApp AFF A250 at a customer's remote site.
In this scenario, which two devices are required to provide an NFS v3 datastore? (Choose two.)
- A. Cisco UCS 6324 Fabric Interconnects
- B. NetApp BES-53248 Switches
- C. Cisco Nexus 3000 Switches
- D. Cisco UCS 6454 Fabric Interconnects
Answer: A,C
NEW QUESTION 32
Where are log files located on a NetApp node?
- A. /mroot/etc/log/mlog/
- B. /log/core/
- C. /mroot/etc/crash/
- D. /etc/mlog/
- E. /letc/log/crash
Answer: A
NEW QUESTION 33
Which three elements are included in a UCS service profile? (Choose three.)
- A. server definition
- B. volume layout
- C. firmware revisions
- D. switch configuration
- E. identity information
Answer: A,C,E
NEW QUESTION 34
To support Storage Virtual Machines, which type of unique login account must be created?
- A. admin, for the cluster
- B. vsadmin, for the cluster
- C. vsadmin, for each Storage Virtual Machine
- D. admin, for each Storage Virtual Machine
Answer: C
NEW QUESTION 35
What is the maximum number of nodes that a NetApp SAN cluster supports?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 36
Given the following switch output, where would you expect see notification level messages?
N5K-1# show logging info.
Logging console: enabled (Severity: error)
Logging monitor: enabled (Severity: informational)
Logging linecard: enabled (Severity: emergency)
Logging fex: enabled (Severity: notifications)
Logging time stamp: seconds
Logging server: disabled
Logging logfile: enabled
- A. On the console
- B. On the terminal sessions
- C. On the linecard
- D. Notification messages will not be seen anywhere
Answer: B
NEW QUESTION 37
How are jumbo frames enabled on the Nexus 5548?
- A. system qosmtu 9216
- B. system jumbo-frame
- C. policy-map type queueingclass type queueing class-defaultmtu 9216
- D. system mtu jumbo 9000
- E. policy-map type network-qos JUMBOclass type network-qos class-defaultmtu 9216system qosservice-policy type network-qos JUMBO
Answer: E
NEW QUESTION 38
You are creating the Gold Master Boot LUN for Windows 2012 R2 Hyper-V hosts.
In this scenario, which three steps are needed to ensure that all Hyper-V hosts will work as desired? (Choose three.)
- A. Use a temporary service profile to install and configure the OS.
- B. Map all Hyper-V hosts to the same Gold Master Boot LUN for consistency.
- C. Use Sysprep to prepare the operating system for duplication.
- D. Disassociate the service profile before cloning the LUN.
- E. Enter in the Windows license key to activate Windows before cloning the LUN.
Answer: A,B,E
NEW QUESTION 39
What aggregate containing the root volume is created during the Clustered Data ONTAP setup process?
- A. 32-bit
- B. 8-bit
- C. 16-bit
- D. 64-bit
Answer: D
NEW QUESTION 40
You are installing two NetApp FAS8080 EX controllers.
Which two ports would you use for HA connectivity? (Choose two.)
- A. ib0a
- B. eof
- C. e0e
- D. ib0b
Answer: A,D
NEW QUESTION 41
How do the Fabric Interconnect ports connecting to the 2232PP FEX have to be configured?
- A. In UCS Manager, the FI ports connecting to the FEX must be set as type 'FEX'
- B. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Auto'
- C. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Network'
- D. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Server'
- E. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Uplink'
Answer: D
NEW QUESTION 42
In which two locations is the VSAN ID configured in a FlexPod solution? (Choose two.)
- A. hypervisor adapter
- B. Storage Virtual Machine
- C. UCS Manager
- D. Nexus switches
Answer: C,D
NEW QUESTION 43
What are two valid cluster interconnect switches? (Choose two.)
- A. Cisco Nexus 9504
- B. Cisco Nexus 7004
- C. Cisco Nexus 5596
- D. NetApp CN610
Answer: C,D
NEW QUESTION 44
Exhibit:
You are configuring iSCSI boot from SAN on your UCS blades.
Referring to the exhibit, how many paths will there be to the Boot LUN?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 45
An administrator has a Flexpod solution configured to use VMware vSphere 6.0. All virtual machines will reside on NAS datastores. Certain critical virtual machines have a requirement to use eager-zeroed thick provisioning.
In this scenario, which VMware capability should the administrator enable to satisfy the performance requirement?
- A. datastore clustering
- B. VMware VMFS VAAI
- C. NetApp NFS VAAI
- D. Storage I/O Control
Answer: B
NEW QUESTION 46
You are attempting to establish a cluster peer relationship between two NetApp clusters, but the peering process fails.
What is a cause for this failure?
- A. The intercluster LIF on each node cannot communicate with the intercluster LIF on each node in the peer cluster.
- B. The node management LIF on each node cannot communicate with the node management LIF on each node in the peer cluster.
- C. The cluster LIFs on each node cannot communicate with the cluster LIFs on each node in the peer cluster.
- D. The cluster management LIF for the cluster cannot communicate with the cluster management LIF for the peer cluster.
Answer: A
NEW QUESTION 47
Exhibit:
Your customer has a FlexPod VMware solution deployed with NFS datastores. As shown in the exhibit, the links between the Fabric Interconnects and storage controllers are single-mode interface groups with autorevert set to true, hosting a single access LIF. NFS I/O is currently going through fabric A to ST-A. The customer wants to use both fabrics for NFS I/O.
In this scenario, what will accomplish this task?
- A. Configure VMware hosts to utilize an NFS LIF on ST-B that is connected to fabric A.
- B. Add two physical links between SW-A and SW-B.
- C. Migrate the existing LIF that is used for NFS I/O on ST-A to its HA partner ST-B.
- D. Configure VMware hosts to use a new datastore with an NFS LIF on ST-B connected to fabric B.
Answer: D
NEW QUESTION 48
......
NS0-176 Study Guide Realistic Verified Dumps: https://dumpstorrent.actualpdf.com/NS0-176-real-questions.html
