Exam Questions Answers Braindumps NSE6_FAZ-7.2 Exam Dumps PDF Questions
Download Free Fortinet NSE6_FAZ-7.2 Real Exam Questions
NEW QUESTION # 11
Which command can you use to find the IP addresses of the devices sending logs to FortiAnalyzer?
- A. diagnose bestapplicationoftpd 3
- B. diagnose debug applicationoftpd 8
- C. diagnose teatapplication miglogd6
- D. diagnose dvm adorn List
Answer: B
Explanation:
The commanddiagnose debug application oftpd 8is used to obtain detailed debug output for the OFTP (Over the FortiGate Protocol) daemon on FortiAnalyzer. This protocol is responsible for the communication and log transfer between FortiGate devices and FortiAnalyzer. By using this debug level, administrators can find information including the IP addresses of devices that are sending logs to FortiAnalyzer.References:FortiOS
7.4.1 Administration Guide, "Diagnostic commands" section.
NEW QUESTION # 12
In a Fortinet Security Fabric, what can make an upstream FortiGate create traffic logs associated with sessions initiated on downstream FortiGate devices?
- A. The traffic destination is another FoitiGate in the fabric.
- B. The downstream device cannot connect to FortiAnalyzer.
- C. The upstream FortiGate is configured to do NAT.
- D. Log redundancy is configured in the fabric.
Answer: B
Explanation:
In a Fortinet Security Fabric, an upstream FortiGate may create traffic logs for sessions initiated on downstream FortiGate devices if the downstream device is unable to connect to FortiAnalyzer. This allows for continuity of logging and ensures that session logs are captured and stored even if the downstream device loses its connection to the log management system.References:FortiAnalyzer 7.4.1 Administration Guide, "Fortinet Security Fabric" section.
NEW QUESTION # 13
Which two parameters impact the amount of reserved disk space required by FortiAnalyzer? (Choose two.)
- A. License type
- B. Total quota
- C. Disk size
- D. RAID level
Answer: C,D
Explanation:
The amount of reserved disk space required by FortiAnalyzer is influenced by the disk size and the RAID level. The system reserves a portion of the disk space for system use and unexpected quota overflow, with the rest available for device allocation. The RAID level determines the disk size and the reserved disk quota level, with different RAID configurations leading to variations in the reserved space.References:FortiAnalyzer 7.2 Administrator Guide, "Disk Space Allocation" and "RAID Level Impact" sections.
NEW QUESTION # 14
Which two statements are true regarding fabric connectors? (Choose two.)
- A. Cloud-out connectors allow you to send real-time logs to public cloud accounts like Amazon S3.
- B. The storage connector service does not require a separate license to send logs to the cloud platform.
- C. Using fabric connectors is more efficient than third-party polling information from the FortiAnalyzer API
- D. Fabric connectors allow you to save storage costs and improve redundancy.
Answer: B,C
NEW QUESTION # 15
An administrator has configured the following settings:
What is the purpose of executing these commands?
- A. To verify the integrity of the log files received.
- B. To record the hash value and authentication code of log files.
- C. To encrypt log transfer between FortiAnalyzer and other devices.
- D. To create the secure channel used by the OFTP process.
Answer: A
Explanation:
The purpose of executing the provided CLI commands, which include setting thelog-checksumtomd5-auth, is to ensure the integrity of the log files. This setting is used to record the MD5 hash value of log files, which is a widely used cryptographic hash function that produces a 128-bit (16-byte) hash value. By using MD5 authentication, FortiAnalyzer ensures that the log files have not been altered or tampered with during transit, thereby verifying their integrity upon receipt.This is not related to encrypting log transfers, scheduling reports, or creating secure channels for OFTP (Over-the-FortiGate Protocol) processes.
NEW QUESTION # 16
Which two of the available registration methods place the device automatically in its assigned ADOM?
(Choose two.)
- A. Fabric Authorization
- B. Request from the device
- C. Pre-shared key
- D. Serial number
Answer: A,D
Explanation:
The registration methods that automatically place a device in its assigned ADOM are using the serial number and fabric authorization. When devices are added to FortiAnalyzer using these methods, they are automatically placed in the appropriate ADOM, which could be a defaultADOM based on the device type or a predefined ADOM based on the serial number or fabric authorization. This simplifies the management of devices and their logs by organizing them into their respective ADOMs from the moment they are registered.References:FortiAnalyzer 7.4.1 Administration Guide, "Default device type ADOMs" and
"Assigning devices to an ADOM" sections.
NEW QUESTION # 17
Which statement is true about the communication between FortiGate high availability (HA) clusters and FortiAnalyzer?
- A. Only the primary device in the cluster communicates with FortiAnalyzer.
- B. Each cluster member sends its logs directly to FortiAnalyzer.
- C. You must add the device lo the cluster first, and thenregistersthe cluster with FortiAnalyzer.
- D. FortiAnalyzer distinguishes each cluster member by its MAC address.
Answer: A
Explanation:
In a FortiGate high availability (HA) cluster, only the primary device sends its logs to the FortiAnalyzer. This is to ensure that logs are not duplicated between the primary and secondary devices in the cluster. The configuration of the FortiAnalyzer server on the FortiGate is such that the HA primary device is set as the server that forwards the logs.References:FortiAnalyzer 7.4.1 Administration Guide, sections mentioning HA cluster configuration and log forwarding.
NEW QUESTION # 18
Which process caches logs on FortiGate when FortiAnalyzer is not readable?
- A. sqlplugind
- B. miglogd
- C. logfiled
- D. oftpd
Answer: C
Explanation:
The processlogfiledin FortiGate units with an SSD disk is responsible for buffering logs when FortiAnalyzer is unreachable. If the connection to FortiAnalyzer is lost and the memory log buffer is full,logfiledallows logs to be buffered on disk. These logs are then sent to FortiAnalyzer once the connection is restored. This reliable logging mechanism ensures that logs are not lost during periods when FortiAnalyzer is not reachable, thereby maintaining log integrity and continuity.References:FortiOS 7.4.1 Administration Guide, "Log Buffering" and
"Reliable Logging" sections.
NEW QUESTION # 19
After you have moved a registered logging device out of one ADOM and into a new ADOM, you run the following command: execute sql-local rebuild-adom <new-ADOM-name> What is the purpose of running this CLI command?
- A. To populate the new ADOM with analytical logs for the moved device, so you can run reports
- B. To migrate the archive logs to the new ADOM
- C. To remove the analytics logs of the device from the old database
- D. To reset the ADOM disk quota enforcement to its default value
Answer: A
Explanation:
When you move a registered logging device from one ADOM (Administrative Domain) to another in FortiAnalyzer, it's essential to ensure that the analytical logs for the moved device are available in the new ADOM to maintain continuity in reporting and log analysis. The commandexecute sql-local rebuild-adom < new-ADOM-name>is used specifically for this purpose. Running this command populates the new ADOM with the analytical logs of the moved device, enabling you to generate accurate and comprehensive reports based on the historical data of the device in its new ADOM context. This process ensures that the transition of devices between ADOMs does not lead to a loss of analytical insight or reporting capabilities for the device's traffic and events.
NEW QUESTION # 20
Refer to the exhibit.
Based on the partial outputs displayed in the exhibit, which devices are ready to be configured as peers in an HA cluster?
- A. FortiAnalyzer1 and FortiAnalyzer2
- B. FortiAnalyzer2 and FortiAnalyzer3
- C. These devices cannot participate in the same cluster.
- D. FortiAnalyzer1 and FortiAnalyzer3
Answer: C
Explanation:
Based on the provided exhibit, which shows partial outputs of the system status and global settings for FortiAnalyzer devices, the devices cannot be configured as peers in an HA (High Availability) cluster. This is indicated by the HA Mode status being set to 'Stand Alone' for the displayed FortiAnalyzer device. For devices to be part of an HA cluster, they would need to havecompatible HA configurations, and usually, they should not be in 'Stand Alone' mode. Additionally, the exhibit only shows information for one FortiAnalyzer, so it cannot be determined if there is another device ready to form an HA cluster with it.
NEW QUESTION # 21
A rogue administrator was accessing FortiAnalyzer without permission.
Where can you view the activities that the rogue administrator performed on FortiAnalyzer?
- A. FortiView
- B. System Settings
- C. Log View
- D. Fabric View
Answer: A
Explanation:
To monitor the activities performed by any administrator, including a rogue one, on the FortiAnalyzer, you should use the FortiView feature. FortiView provides a comprehensive overview of the activities and events happening within the FortiAnalyzer environment, including administrator actions, making it the appropriate tool for tracking unauthorized or suspicious activities.References:FortiAnalyzer 7.4.1 Administration Guide,
"System Settings > Fabric Management" section.
NEW QUESTION # 22
Refer to the exhibit.
Which image corresponds to the packet capture shown in the exhibit?
- A.
- B.
- C.
Answer: B
Explanation:
The exhibit shows a packet capture with a syslog message containing a log event from a FortiGate device. This log event includes several details such as the date, time, and event message. The corresponding image that matches this packet capture would be the one which shows that the FortiGate device has logs being received in real-time, as indicated by the highlighted section in the packet capture where it mentions "real-time".
Therefore, Option A is the correct answer because it shows logs with "Real Time" status for the FortiGate-VM64 device, indicating that this FortiAnalyzer is currently receiving real-time logs from the device, matching the activity in the packet capture.References:Based on the provided exhibits and the real-time logging information, correlated with the knowledge from the FortiAnalyzer 7.2 Administrator documentation regarding log reception and device management.
NEW QUESTION # 23
Which FortiAnalyzer command erases all device settings, images, databases, and logs on disk, but preserves The network configuration?
- A. executeformatlogdisk
- B. executefactory-reset
- C. executereset all-except-ip
- D. executeformat disk
Answer: B
Explanation:
The FortiAnalyzer commandexecute factory-resetis used to erase all device settings, images, databases, and logs on disk but preserves the current IP address and route information. This command effectively resets the FortiAnalyzer to its factory settings while maintaining its network configuration, allowing it to be quickly reconfigured with the same network settings.References:FortiAnalyzer 7.4.1 Administration Guide, "Reset Commands" section.
NEW QUESTION # 24
......
Latest Fortinet NSE6_FAZ-7.2 Real Exam Dumps PDF: https://dumpstorrent.actualpdf.com/NSE6_FAZ-7.2-real-questions.html
