Free JNCIP-SEC JN0-636 Ultimate Study Guide (Updated 140 Questions)
Get to the Top with JN0-636 Practice Exam Questions
The JN0-636 certification exam is a comprehensive exam that covers a wide range of topics related to Junos security. These topics include security policies, firewall filters, NAT, IPsec VPNs, high availability, and security automation. The exam is intended for security professionals who have a minimum of two years of experience working with Junos security technologies. Candidates must also have a good understanding of networking concepts and protocols.
The Juniper JN0-636 exam is a professional level certification exam in the security domain. It is designed to test the skills and knowledge of security professionals who are responsible for implementing, configuring, and troubleshooting Juniper Networks security solutions. The exam is intended for individuals who hold a JNCIA-Junos certification and have at least two years of experience in the security field.
NEW QUESTION # 10
Exhibit
Your company recently acquired a competitor. You want to use using the same IPv4 address space as your company.
Referring to the exhibit, which two actions solve this problem? (Choose two)
- A. Configure IPsec Transport mode.
- B. Identify two neutral IPv4 address spaces for address translation.
- C. Connect the competitor network using IPsec policy-based VPNs.
- D. Configure static NAT on the SRX Series devices.
Answer: C,D
NEW QUESTION # 11
You are asked to configure a security policy on the SRX Series device. After committing the policy, you receive the "Policy is out of sync between RE and PFE <SPU-name(s)>." error.
Which command would be used to solve the problem?
- A. request service-deployment
- B. request security polices resync
- C. request security polices check
- D. restart security-intelligence
Answer: B
NEW QUESTION # 12
Click the Exhibit button.
The exhibit shows a snippet of a security flow trace. A user cannot open an SSH session to a server.
Which action will solve the problem?
- A. Create a route to the desired server
- B. Create a security policy that matches the traffic parameters
- C. Edit the source NAT to correct the translated address
- D. Create a route entry to direct traffic into the configured tunnel
Answer: B
NEW QUESTION # 13
Referring to the exhibit, which two statements are true about the CAK status for the CAK named
"FFFP"? (Choose two.)
- A. CAK is not used for encryption and decryption of the MACsec session.
- B. SAK is not generated using this key.
- C. SAK is successfully generated using this key.
- D. CAK is used for encryption and decryption of the MACsec session.
Answer: B,D
NEW QUESTION # 14
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The data that traverses the ge-O/0/0 interface is secured by a connectivity association key.
- B. The data that traverses the ge-070/0 interface can be intercepted and read by anyone.
- C. The data that traverses the ge-0/070 interface is secured by a secure association key.
- D. The data that traverses the ge-070/0 interface cannot be intercepted and read by anyone.
Answer: B,D
NEW QUESTION # 15
An administrator wants to configure an SRX Series device to log binary security events for tenant systems.
Referring to the exhibit, which statement would complete the configuration?
- A. Configure the tenant as root for the pi security profile.
- B. Configure the tenant as master for the pi security profile.
- C. Configure the tenant as TSYS1 for the pi security profile.
- D. Configure the tenant as local for the pi security profile
Answer: A
NEW QUESTION # 16
Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The c-1 TSYS can use security flow resources up to the system maximum.
- B. The c-1 TSYS has no reservation for the security flow resource.
- C. The c-1 TSYS cannot use any security flow resources.
- D. The c-1 TSYS has a reservation for the security flow resource.
Answer: B,C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-profile-logical-system.html
NEW QUESTION # 17
Exhibit
Referring to the exhibit, which statement is true?
- A. This custom block list feed will be used instead of the Juniper Seclntel block list feed
- B. This custom block list feed will be used after the Juniper Seclntel block list feed.
- C. This custom block list feed will be used before the Juniper Seclntel
- D. This custom block list feed cannot be saved if the Juniper Seclntel block list feed is configured.
Answer: B
NEW QUESTION # 18
Which two modes are supported on Juniper ATP Cloud? (Choose two.)
- A. transparent mode
- B. private mode
- C. Layer 3 mode
- D. global mode
Answer: A,C
NEW QUESTION # 19
You are connecting two remote sites to your corporate headquarters site.
You must ensure that all traffic is secured and sent directly between sites.
In this scenario, which VPN should be used?
- A. Layer 2 VPN
- B. full mesh Layer 3 VPN with EBGP
- C. hub-and-spoke IPsec VPN
- D. IPsec ADVPN
Answer: C
NEW QUESTION # 20
Exhibit
Referring to the exhibit, which type of NAT is being performed?
- A. Source NAT
- B. Destination NAT
- C. Static NAT
- D. Persistent NAT
Answer: A
NEW QUESTION # 21
Click the Exhibit button.
Referring to the exhibit, which three topologies are supported by Policy Enforcer? (Choose three.)
- A. Topology 5
- B. Topology 3
- C. Topology 2
- D. Topology 1
- E. Topology 4
Answer: B,D,E
NEW QUESTION # 22
You must implement an IPsec VPN on an SRX Series device using PKI certificates for authentication. As part of the implementation, you are required to ensure that the certificate submission, renewal, and retrieval processes are handled automatically from the certificate authority.
In this scenario, which statement is correct.
- A. You can use SPKI to accomplish this behavior.
- B. You can use CRL to accomplish this behavior.
- C. You can use OCSP to accomplish this behavior.
- D. You can use SCEP to accomplish this behavior.
Answer: D
Explanation:
Certificate Renewal
The renewal of certificates is much the same as initial certificate enrollment except you are just replacing an old certificate (about to expire) on the VPN device with a new certificate. As with the initial certificate request, only manual renewal is supported. SCEP can be used to re-enroll local certificates automatically before they expire. Refer to Appendix D for more details.
NEW QUESTION # 23
Which Junos security feature is used for signature-based attack prevention?
- A. RADIUS
- B. PIM
- C. AppQoS
- D. IPS
Answer: D
NEW QUESTION # 24
According to the log shown in the exhibit, you notice the IPsec session is not establishing.
What is the reason for this behavior?
- A. Incorrect peer address.
- B. Mismatched peer ID
- C. Mismatched proxy ID
- D. Mismatched preshared key
Answer: B
Explanation:
https://www.juniper.net/documentation/en_US/release-independent/nce/topics/example/policy-based-vpn-using-j-series-srxseries-device-configuring.html
NEW QUESTION # 25
The show network-access aaa radius-servers command has been issued to solve authentication issues.
Referring to the exhibit, to which two authentication servers will the SRX Series device continue to send requests? (Choose two.)
- A. 192.168.30.188
- B. 192.168.30.190
- C. 200l:DB8:0:f101::2
- D. 192.168.30.191
Answer: A,D
NEW QUESTION # 26
You correctly configured a security policy to deny certain traffic, but logs reveal that traffic is still allowed.
Which specific traceoption flag will help you troubleshoot this problem?
- A. routing-socket
- B. lookup
- C. configuration
- D. rules
Answer: D
NEW QUESTION # 27
Click the Exhibit button.
A user is trying to reach a company's website, but the connection errors out. The security policies are configured correctly.
Referring to the exhibit, what is the problem?
- A. Static NAT is missing a rule for DNS server
- B. DNS ALG must be disabled
- C. The action for rule 1 must change to static-nat inet
- D. Persistent NAT must be enabled
Answer: A
NEW QUESTION # 28
Which two statements are correct regarding tenant systems on SRX Series devices? (Choose two.)
- A. A maximum of 500 tenant systems can be configured on a physical SRX device.
- B. All tenant systems share a single routing protocol process.
- C. A maximum of 32 tenant systems can be configured on a physical SRX device.
- D. Each tenant system runs its own instance of the routing protocol process
Answer: C,D
NEW QUESTION # 29
Referring to the exhibit, which three protocols will be allowed on the ge-0/0/5.0 interface?
(Choose three.)
- A. OSPF
- B. IPsec
- C. DHCP
- D. IBGP
- E. NTP
Answer: A,B,E
NEW QUESTION # 30
......
The Juniper JN0-636 (Security, Professional (JNCIP-SEC)) Exam is an industry-standard certification that demonstrates a candidate's proficiency in designing and implementing advanced network security solutions using Juniper Networks technologies. It is a valuable certification for network security professionals looking to advance their careers and stay up-to-date with the latest security technologies and best practices.
Pass Juniper JN0-636 exam - questions - convert Tets Engine to PDF: https://dumpstorrent.actualpdf.com/JN0-636-real-questions.html
